-
Products
- Air to water heat pump effiQueenc
- Boiler maintenance parts
- Circulator pump and flange
- Hardware, fitting, ball valve and tools
- Heat exchanger
- Heating and cooling unit
- Hot water boiler
- Hydronic separator and air eliminator
- Manifold and Actuator
- Pex pipe and pre-insulated piping
- Pressurization and tank
- Thermostat and control
- Promotions
- About us
- Les Fournaises T.J. - Homepage>
- Catalog>
- Circulator pump and flange>
- Circulator pump>
- Circulator Pump GPD25-10SFC
Circulator Pump GPD25-10SFC
Product Code: TJ-GPD25-10SFC
The GPD-25-10SFC cast iron 3 speed 115 volt circulation pump. Check valve and seals included. Flanges sold separately.
The GPD series circulator pumps are specifically designed for heating systems or cooling system, boiler/hydronic heating, ground source heat pumps, air to water heat pump, solar water heating, and hot-water recirculation. The pumps can also be used to supply water circulation for cooling airconditioning systems.
Specifications comparable to model : Replaces: Grundfos UPS26-99FC, UP26-64, UP-26-96 / B&G NRF-36, NRF-45 / Taco 0011, 0013, 0014 / Armstrong Astro 50, 30, E7, 280 / Wilo Star 33, or for a new system will fit to modern American flanges.
| Model Number | GPD25-10SFC |
| Pump Housing | Cast Iron |
| Number of speed | 3 |
| Power consumption Speed (1) | 135 W |
| Power consumption Speed (2) | 190 W |
| Power consumption Speed (3) | 200 W |
| Amperage Speed (1) | 1.2 A |
| Amperage Speed (2) | 1.7 A |
| Amperage Speed (3) | 1.8 A |
| Voltage | 115v |
| Hertz | 60 Hz |
| Phase | 1 |
| Motor | 2 Poles,1 Phase |
| Insulation Class H | 356°F (180°C) IP44 |
| Capacitance | 20uf/450V |
| Connection Port | Flange 2 holes Standard |
| Power HP | 1/6 HP |
| Max. Flow | 32 GPM |
| Max. Head/Feet | 30 Ft |
| Max. Working Temperature (liquid) | 36°F (2°C) ~ 230°F (110°C ) |
| Max. Pressure | 145 PSI |
| Certification | CSA, UL |
Technical Document
- Availability: In stock
(418) 397-0114